Non-Sale

Female to Female adapter- This adapter allows a Stilo helmet with male plug to be connected to a nascar 3C plug

Introducing our Adapter IMSA Female to Stilo Intercom Female, your ultimate solution for seamless communication compatibility. Crafted with precision and reliability in mind, this adapter bridges the gap between IMSA Female and Stilo Intercom Female connections, ensuring uninterrupted communication in motorsport environments.

Female to Female adapter- This adapter allows a helmet with Peltor electronics and male plug to be attached to a Stilo WRC, WRC Des, DG10, DG30 and ST30 Intercom. Can also be used with other brands of helmet that use Peltor with the male...

Adapter cable to allow connection between the Stilo Trophy Rally helmets with the Trophy electronics to a Terraphone connection.

The Stilo replacement peaks are a direct replacement, ideal for replacing damaged or can be kept as a spare.  Helps prevent glare from sunlight Can be fitted along with a short or full visor Direct replacement and easy to fit

Fitting kit for Short Peak & Short Visor/Long Peak & Long Visor

For use with the Venti WRX Dirt Helmet

For use with the Venti WRX Dirt Helmet

This 90 degree coupler is a replacement for the connector found withing PN: YA0650. Simply connect the adapter to you drink hose and fasten to you mating connector to use the drink system.

Replacement hydration tube for YA0600 Inner hydration system

Replacement Female hydration connector for YA0600.

Engineered to simply work, this system is tailored to deliver a focused stream of cooling air exclusively to the top of the helmet, ensuring optimal comfort and performance for drivers in the heat of competition. Crafted with precision and durability in mind, the Stilo...

The exclusive Stilo "Top Air System" for ST4F helmets takes fresh air to the driver's head and nose. With the innovative system for the air flow regulation you can favor the air flow on the driver's face for a better breathing or for cooling...

Stilo 45 Degree Elbow, the perfect addition to enhance your Stilo helmet's air intake system. Crafted for optimal performance, this elbow seamlessly attaches to the top intake of your helmet, ensuring a streamlined airflow for maximum comfort and ventilation.

Available in 20, 25, 30, 33, and 35mm thickness. Both left and right cheek pads.

Engineered to simply work, this system is tailored to deliver a focused stream of cooling air exclusively to the top of the helmet, ensuring optimal comfort and performance for drivers in the heat of competition. Crafted with precision and durability in mind, the Stilo...

Designed to work with our modular top air units this straight connector allows you to adapter a hose or Maglock connector to your air systems. Designed to be modular this item can interchange with our 90 degree adapter.

Introducing the Top Air Modular Air Inlet-90 Degree, the essential adapter designed to seamlessly bridge the gap between the FluidLogic Maglock system and a range of Stilo Top Air Systems. Crafted with precision engineering and versatility in mind, this adapter serves as the perfect...

*All Paragon products work seamlessly with Coolshirt products. Paragon’s Everlast Ice allows for longer cooling periods when added to ice and water in all Paragon coolers and Paragon cooler bags. Paragon’s Everlast Ice should be kept in a freezer until ready for use. Compatible...

*All Paragon products work seamlessly with Coolshirt products. Paragon’s Laundry Bag is the perfect accessory for any Paragon cooling garment. The nylon Paragon Laundry Bag protects your Paragon cooling garment investment during repeated laundering.

*All Paragon products work seamlessly with Coolshirt products. Paragon’s Arctic Air Cylinder is designed to specifically be used in conjunction with Paragon’s Viking Cooler and Paragon’s 8ft Y-Hose to allow for chilled air through the helmet. The Arctic Air Cylinder circulates chilled water internally...

*All Paragon products work seamlessly with Coolshirt products. Paragon’s Straight Helmet Fitting is custom made for connecting Paragon’s 1.25” Air Hose to the individual customer’s helmet connection point with an estimated diameter of 0.875”. The straight through design of Paragon’s Straight Helmet Fitting assists...

*All Paragon products work seamlessly with Coolshirt products. Paragon’s Angled Helmet Fitting is custom made for connecting Paragon’s 1.25” Air Hose to the individual customer’s helmet connection point with an estimated diameter of 1.3”. The 45° angle helps keep the overall height to a...

*All Paragon products work seamlessly with Coolshirt products. Paragon’s 4” Blower Filter Housing Fitting is custom made for connecting Paragon’s 3” Air Hose to Paragon’s 240CFM Air Blower. The Paragon 4” Blower Filter Housing Fitting houses Paragon’s Blower Air Filter Screen and Paragon’s Blower...

*All Paragon products work seamlessly with Coolshirt products. Paragon’s 4” Blower Hose Fitting is custom made for connecting Paragon’s 1.25” Air Hose to Paragon’s 240CFM Air Blower.

*All Paragon products work seamlessly with Coolshirt products. Paragon’s 1.5” Hose End Fitting is custom made for connecting Paragon’s 1.5” Air Hose to the PVC portion of Paragon’s Viking Pro and Viking Pro Dual coolers.

*All Paragon products work seamlessly with Coolshirt products. Paragon’s Blower Air Filter is key to maintaining the 240CFM blower’s performance by trapping dirt and dust aiding in protecting its internal components. Frequent replacement of Paragon’s Blower Air Filter will ensure cleaner air and reduce...

*All Paragon products work seamlessly with Coolshirt products. Paragon’s Blower Air Filter Screen is a metal screen perfectly sized for the 240CFM blower to assist in keeping large debris from entering the blower. The Paragon Blower Air Filter Screen inserts into the intake side...

*All Paragon products work seamlessly with Coolshirt products. Paragon’s 3” x 5’ Air Hose is designed to work with most NACA ducts on the market allowing fresh air from outside the car to feed the 240CFM blower providing optimal air flow for head cooling...

*All Paragon products work seamlessly with Coolshirt products. Paragon’s 1.5” x 10’ Air Hose is designed to work with Paragon Viking Pro coolers, Viking Pro Bundles and Air Blower Bundles. At 1.5” diameter, the Paragon Air Hose is small and flexible enough to route...

*All Paragon products work seamlessly with Coolshirt products. Paragon’s 240CFM Blower is designed for efficient high output performance. The Paragon 240CFM Blower features front and rear shaft seals and a corrosion resistant motor housing for optimal durability and longevity all while providing high air...

*All Paragon products work seamlessly with Coolshirt products. Paragon’s O-Ring Pack is offered as a replacement for dried, cracked or torn O-rings on all Paragon Male Connectors.