necksgen

This small, lightweight simple carrying bag fits any REV, REV2 Lite, or REV2 Carbon head and neck restraint. Measuring 15x9x4, this bag also will fit your device if it has the Rally Pad, but it will need to be rolled up to fit in....

If you have a helmet that you are drilling yourself to mounting the quick release hardware, you will need to purchase this kit. As of 2023, load plates and wrenches are no longer included with helmet hardware or restraints. These load plates are threaded...

This M6 x 12mm Low Height Cap Screw is made from Stainless steel and comes with thread locker pre-installed. Used in helmet hardware to connect housing to the load plate through the shell.

Replacement pads for your NecksGen Original device. Select your size from the dropdown box. Pads are covered in fire retardant fabric with integral Kevlar tether strap and stainless steel mounting buckles.

High quality fire resistant kevlar tethers with stainless steel buckles. Select the length of tether you need from the dropdown box. Some NecksGen Original Devices came standard with an adjustable length tether. Adjustable tethers are no longer available. Please select the length you need...

Need an extra set of quick releases for your spare helmet? This is the current standard issue quick release helmet hardware set (pair) that fits ALL NecksGen devices. Also Includes:  2- M6-1.0 X 12mm bolts2- Plastic backing plate (optional use)1- 4mm hex key NOTE: As of 2023, the...

6 POINT ONLY! We've made a complete overhaul to our line of racing harnesses. They will still carry the SFI 16.1 certification and come in two webbing widths to fit your application and sanctioning bodies requirements, but they have been improved in every way....

NOTE: Restraint not included, pad only! The new Rally Pad is an alternative option for those who want to keep their NecksGen HNR snugly attached to their body. Spawned from requests by off-road and rally drivers who get in and out of their vehicles...

Made in the USAThe NecksGen units are designed and made in the USA, using the latest carbon fiber composite Dupont material. Not only are these materials lightweight, but they are extremely strong.SFI 38.1 CertificationAll NecksGen head and neck restraints have passed the mandated SFI...

Replacement tether to fit your NecksGen REV device. The NecksGen tethers are made from high quality fire resistant nylon/kevlar blended webbing and stainless steel buckles. If you are in an incident that causes any stress to your device it is recommended that you replace...

NEW PRODUCT! The REV X Carbon is NecksGen's newest head and neck restraint. Hand made from carbon fiber and lightweight materials, the new REV X adds an extra element to driver comfort. The X strap system holds the device securely in place while driving,...

The NecksGen REV2 Carbon design features NecksGen's patented yokeless and beltless design, while also incorporating a patented single-tension neutralizing tether system. With the goal to improve ergonomics and safety, the use of state-of-the-art carbon manufacturing means that the new device is both stronger and...

The REV 2 LITE is the ultimate head and neck restraint. Weighing in at only 1.2 lbs. / 550 grams, the REV2 LITE carries the same level of protection and certifications as the NecksGen Original and REV devices. The REV2 LITE has all the...

Replacement pads for your REV2 Lite. Over time your pads may need to be replaced due to wear and tear. These are the standard style that come with the device when new. Sold in pairs. Covered in a durable F.R. material on top, and...

Replacement tether to fit your NecksGen REV device. The NecksGen tethers are made from high quality fire resistant nylon/kevlar blended webbing and stainless steel buckles. If you are in an incident that causes any stress to your device it is recommended that you replace...

Designed with soft foam to fit under your chin or front of your helmet. The Wedge is a 1/2 collar designed specifically to fit in front of your REV or REV2 Line of head and neck restraints. This frontal collar helps stabilize your head...

All the basic tools you need to install or work on your NecksGen HNR. The correct tools are all included with your device when it was new, but some people like to keep spares.  Note: Wrench style may vary

SIZING: (HIGH = 2.5" Thick) (MED = 2.0" Thick) (LOW = 1.0" Thick) If you've ever gone for a long ride in a UTV, chances are you've found out the hard way exactly how heavy your head really is. The bouncing, bobbling, swaying for...

Visor Decal to show your support! Designed to fit the contour of a Bell visor, but fits many others. 12" long.