Coolshirt Accessories

This non-toxic bio-degradable solution contains a fungicide yet is safe to use in all COOLSHIRT cooling systems.Regular use of this additive will not only help clean the system but it will also improve the performance and life of the system pump. COOLSHIRT Systems recommends...

This hose is designed to work with our ice-based systems and will release with 20lbs of force on the female fittings. Will work with most COOLSHIRT garments.

Fittings for your COOLSHIRT System

Drain Kit (2 lg FLM w/ 2’ hose & 1 MLS)

Allows driver to exit vehicle quickly without disconnecting the shirt first.Kit includes white connectors with red tabs for the hose only.

Cool Shirt 19 Quart Cooler System Mounting Tray. Includes Strap.

This temperature control switch allows you to control the flow of water to your cool shirt. This switch allows you to conserve or increase the flow of cold water to the cool shirt.

Cool Shirt 13 Quart Cooler System Mounting Tray. Includes Strap.

The black comet pump is a direct replacement pump for all COOLSHIRT hard cooler systems. The pump is an industrial-grade water pump designed to give your COOLSHIRT System long life and exceptional performance

Bulkhead fittings for your COOLSHIRT System. Two (2) required for each cooler

The COOLSHIRT thermal pad is designed to fit perfectly into the bottom of our trays (see illustration) to insulate your coolers from the hottest part of your car, the floor pan. Weighing in at just over 3 ounces, the thermal pad is the perfect...

COOLSHIRT Endurance Ice contains a specially formulated leakproof, long-lasting, viscous gel refrigerant made with non-toxic ingredients listed as FDA GRAS. Rated “Best in all aspects”. COOLSHIRT Endurance Ice is the ultimate in refrigerant cold packs. Features include: Long-lasting cold Efficient transfer of energy Leakproof...

Rechargeable Lithium-Ion Battery for portable cooling systemsIncludes 8.4v Lithium-Ion Battery and Charger

Air Hose 1 ½” ID x 8’ or 3” ID x 3’

Pack of 6 O-Rings

Fittings for your COOLSHIRT System

Laundry Bags for easier cleaning of COOLSHIRT garments

The COOLSHIRT NACA duct provides air flow to the cooler in order to help cool the driver. The NACA duct brings in fresh air from outside of the car instead of having to rely on the hot air inside of the car. This provides...

Safety Pull Female Bulkhead fittings for your COOLSHIRT System. Two (2) required for each cooler.

Coolshirt Blower Hose End Fitting

Blower Filter Housing 3” ID x 3” ID

Replacement Safety Pull connectors for repairs or draining.Comes with (4) female connectors, (4) male connectors, (6) O-Rings, and replacement part for male connector.

Replacement Blower fans available in both 135 and 235 CFM

The Dry-Cool Air system add-on allows you to convert you club cool water system into a cool air infused unit as well. The kit includes the blower, all hoses needed to attach to the unit and to your helmet.

8 Foot Y-hose with safety pull release fittings.

The blue motorsports pump is a direct replacement pump for all COOLSHIRT bag cooler systems. The pump is an industrial-grade water pump designed to give your COOLSHIRT System long life and exceptional performance

Filter & Screen 3” – 4” or 10pk

Coolshirt Hose End Fitting Helmet

Switch allows you to control the flow of air and cool water in your Cool Shirt Pro Air and Water system in your car.

Hose End Fitting 1 ½ ID – Cooler

12? water hose with our safety pull release fittings designed to work exclusively with our ProCool R unit. This hose is designed to release with 20lbs of force on the female fittings. Will work with most COOLSHIRT garments.