Non-Sale

The AiM Infrared (IR) tyre temperature sensors have four pins black 719 binder plug connections to fit all AiM loggers and dash display/loggers. Key Features: IR Temperature sensor 719 binder connectionThe AiM Infrared (IR) tyre temperature sensors have four pins black 719 binder plug...

Infrared replacement sensor for the belt temperature system.Key Features:- Direct replacement sensor- Fits infrared belt temperature system- Threaded section & lock nut for fitting- 719 4 pin binderThe AiM infrared sensor is a direct replacement for the sensor supplied with the AiM Belt Temperature...

The AiM Exhaust Gas Temperature Sensor (EGT) can measure the exhaust gas temperature by being placed in the exhaust header pipe.Key Features :- Measure exhaust gas temperature- Thermocouple male fitting- Wide temperature range The AiM K Type thermocouple temperature sensor is fitted with a...

AiM Water/Oil Temperature Sensor The AiM temperature sensor is suitable for reading water and oil temperatures.Key Features :- Suitable for water/oil temperature- 4 pins 719 male binderThe AiM oil/water (coolant) temperature sensor is fitted with a male four pins black 719 binder plug connections...

The HANS Contour Padding Kit has sealed pockets that combine air and foam with alligator shaped padding, solving some comfort issues, especially when gators can be placed over problem areas.FEATURES:Supplied with fire-retardant cotton socksNOTE:Size small fits small and super small onlyMost devices will require...

The all-aluminum Forte Pedal Face Plates are a sock-friendly, quick-to-mount accessory to your Invicta™ Sim Racing Pedals. The face plates can be adjusted to your preferred setting for the best sim racing experience.The set includes two pedal face plates for brake and throttle.Do you...

The firm throttle spring is an easy-to-install accessory for your Asetek SimSports® Invicta™ pedals. The throttle spring is harder than the one originally included and allows you to have a firmer sensation and even better throttle control. It gives you a better feel when...

Inspired by real-life racing standards, the Forte Sim Racing Pedal set has been thoroughly tested by racers and sim racers alike. With that feedback in mind, the sim pedals are engineered and designed. The M.L.C.P.C.™ (Mechanical Load Cell Powered Cylinder) brake cylinder is designed...

The Invicta™ Clutch was designed and tested rigorously during development to ensure that the racer will feel a realistic bite point when shifting gears in the racing simulator. The fierce spring load gives you a realistic and slamming rebound, and a feeling of true...

Asetek SimSports Invicta Pedals are the pin­nacle of sim racing gear. The hydraulic sim racing pedals are designed with real racecar feel, durability, and ease of use in mind. They are plug’n’play capable out of the box and by using the Asetek SimSports RaceHub™...

Kit Contains: VBOX HD Lite Unit, Lightweight suction mount, 32Gb Class 10 Micro SD card, Cigar power supply cable, WiFi Dongle for video preview, GNSS Antenna, Protective lens coverTrackKit Contains: VBOX HD Lite Unit, Camera roll cage mount , 32Gb Class 10 Micro SD...

Compact, Advanced, PreciseThe SmartyCam 3 Corsa: The Ultimate Motorsports Camera. Engineered to deliver unparalleled video performance, with integrated GPS and ECU data for complete and comprehensive information.The NEW SmartyCam 3 Corsa saves all your information to a supported SD card for up to 2TB...

With temperatures that can reach 130 degrees in the cockpit of a racecar, a driver can loose up to 10 pounds in fluid loss during a 3 hour race. Dehydration can impair a driver’s ability to concentrate and focus during long stints. The Sparco...

The Stage backpack was designed to hold all of your gear including your laptop and tablet. It features 2 front and side pockets; an organizer compartment with internal pockets, a large main storage compartment, and a padded laptop compartment (fits most 15" laptops). The...

The Super Stage is the ultimate backpack. It was designed to carry all of your gear with two large compartments and a large front pocket. The rear compartment is padded and designed to carry electronics. It can fit up to a 17” laptop and...

The Sparco Martini Sportbag is a retro duffle bag made with durable high-density cotton canvas, The Sportbag is dual color duffle printed with the icon Martini Racing stripes. The Sportbag features leather double handles, removable shoulder strap, inner pocket and zipper outer compartment.Capacity -...

The Dakar Mini is a versatile toiletry bag based on the full size Dakar bag. The Dakar Mini features a “D” opening with supported hinges so the bag can hang from the internal hook. It has a zipper mesh compartment for small items. The...

The DAKAR is a water-resistant duffel bag that can also be used as a backpack. The Dakar features a large main compartment to hold race gear along with a mesh zipper compartment. There is an additional outer pocket for items that need to be...

The Sparco x M-Sport Winter Jacket is a technical jacket made for cold and wet conditions. The Winter Jacket is both waterproof and windproof using a dual density insulation. It also features an insulated hood along with a magnetic neck closure and an elastic...

The Sparco x M-Sport Soft Shell is a technical jacket made for cold and wet conditions. The Soft Shell is both waterproof and windproof using 2-layer fabric. It features a soft inner liner along with a magnetic neck closure. The Soft Shell comes in...

The Martini Replica Vest is made of Ripstop fabric, embroidered with Martini Racing logos and stripes. Features an internal pocket, elastic waist band, special Martini Racing striped zipper flap, and contrast color inner liner. Sizes: S-XXL 100% polyamide Available in navy or red*Sizes run...

This wind breaker is a soft, lightweight jacket made of wind/water repellent fabric with Martini Racing logos and stripes. Available in navy color, sizes: S-XXXL. Material: 100% polyester. *Sizes run smaller than normal. We recommend selecting one size up

THE TRACK JACKET EMBODIES FUNCTION AND STYLE WITH ITS WATER-REPELLANT FABRIC AND EMBROIDERED MARTINI RACING LOGOS AND STRIPES. THE JACKET FEATURES FOUR OUTER POCKETS, TWO INTERNAL POCKETS, A DETACHABLE AND ADJUSTABLE HOOD WITH DRAWSTRING, AND SLEEVE CUFFS WITH ADJUSTABLE CLOSURE. AVAILABLE IN NAVY COLOR,...

The Sparco Vest is a soft, lightweight vest with comfortable side stretch panels. It is made of wind/water resistant fabric. The Vest is available in Black, Black/Blue, Navy/Black, and Grey/Black. Sizes XS-XXL.This item is made in Italy with a European cut. It runs smaller...

The Sparco Winter Jacket is a technical jacket made for cold and wet conditions. The Winter Jacket is both waterproof and windproof using a dual density insulation. It also features an insulated hood along with a magnetic neck closure and an elastic cuff in...

The Sparco 3IN1 Jacket is a technical jacket made for extreme conditions. The 3IN1 Jacket is both waterproof and windproof using a 3-Layer construction. It features a removable inner vest along with internal pockets. The 3IN1 has an insulated adjustable hood and elastic cuff...

The Sparco Soft Shell is a technical jacket made for cold and wet conditions. The Soft Shell is both waterproof and windproof using 2-layer fabric. It features a soft inner liner along with a magnetic neck closure. The Soft Shell is available in Black,...

The Sparco Full Zip is a soft, lightweight technical jacket made of wind/water resistant fabric. The Full Zip is available in Navy/Black, and Grey/Black. Sizes XS-XXL. Wind/Water Resistant Sizes: XS-XXL Made in Italy

The Sparco Heritage is a light-weight packable puff jacket. The lightweight nylon shell with Hyper-Loft synthetic insulation provides warmth for all seasons. It is water and wind resistant with a 100% nylon exterior shell. The Heritage packs down into the inside chest pocket for...

SPARCO X MARTINI RACING   Made with an ultra-soft cotton blend featuring the iconic Martini Racing livery. Fully embroidered logo patches and stripes. Available in white or celeste. Sizes S-L. Material: polyester/cotton blend - soft jersey lined hood.   *Sizes run smaller than normal. ...

The Sparco x M-Sport Hoodie is made with a soft cotton-poly blend. The Hoodie comes in the M-Sport team's iconic Marine Blue color. It features side an adjustable hood, welt pockets, cuffs and bottom hem in fine rib stretch material. The official logos are...

The Sparco x M-Sport T-Shirt is made with a soft Cotton-Poly blend material. The T-Shirt comes in the M-Sport team's iconic Marine Blue color. The official logos are positioned like the M-Sport drivers' suits and crew teamwear. Available in XS-XXL. Made in ItalyEUROPEAN FITThis...

The Sparco Polo Corporate Lady is the women’s cut of the Polo Corporate. It is made with soft Pique cotton. The Polo Corporate Lady has a 2-button closure with a ribbed collar. Sizes S-L EUROPEAN FITThis item is made in Italy with a European...

The Sparco Polo Corporate is made with soft Pique cotton. It features a 2-button closure with a ribbed collar. The Polo Corporate is available in Black, Navy or White. Sizes S-XXL EUROPEAN FITThis item is made in Italy with a European cut. It runs...

The Sparco Tech Polo TW is made with soft cotton-poly blend with a Pique effect. It features a 3-button closure with a ribbed collar. The Tech Polo TW is available in Black/Grey, Navy/Blue, Navy/Orange and Grey/Yellow. Sizes XS-XXLEUROPEAN FITThis item is made in Italy...

The EVO XL Carbon is the all-carbon fiber version of the EVO XL QRT. It is constructed with “Pre-Preg” aerospace grade carbon fiber, also known as Dry Carbon. EVO XL Carbon is the lightest “X-Large” size seat on the market. It weigh 10.5lbs (shell...

The EVO L Carbon is the all-carbon fiber version of the EVO L QRT. It is constructed with “Pre-Preg” aerospace grade carbon fiber, also known as Dry Carbon. EVO L Carbon is one of the lightest “large” size carbon fiber seats on the market....

The EVO Carbon is the all-carbon fiber version of the EVO QRT. It is constructed with “Pre-Preg” aerospace grade carbon fiber, also known as Dry Carbon. EVO Carbon is one of the lightest carbon fiber seats on the market. It weighs less than 10lbs...

ULTRA CARBON The Ultra Carbon seat is the lightest FIA 8859-1999 seat in the Sparco range at 9.5 lbs. It is constructed with “Pre-Preg” aerospace grade carbon fiber, also known as Dry Carbon which gives the best strength to weight ratio. The Ultra Carbon...

The Circuit II Carbon is a wider version of the Circuit Carbon which is a competition seat designed to provide additional head and neck protection. It is constructed with light weight “Pre-Preg” aerospace grade carbon fiber, also known as Dry Carbon. The Circuit II...

The Circuit Carbon is the carbon fiber version of the Circuit QRT which is a competition seat designed to provide additional head and neck protection. It is constructed with light weight “Pre-Preg” aerospace grade carbon fiber, also known as Dry Carbon. The Circuit Carbon...

The ADV ELITE is an extremely strong, ultra-light weight carbon fiber seat designed to pass the FIA’s highest seat rating FIA 8862-2009. This means that the ADV ELITE has been tested to an impact of approximately 70G. This rating is required for WRC racing...

The ADV XT is an extremely strong, ultra-light weight carbon fiber seat designed to pass the FIA’s highest seat rating FIA 8862-2009. This means that the ADV XT has been tested to an impact of approximately 70G. This rating is required for GT racing...

The ultimate motorsport camera by AiM with one bullet camSmartyCam 3 GP is the flagship version of SmartyCam 3 range, designed for any racer who wants to get the most out from any performance video on the track.Single Full HD camera system, Video output,...

The Meru ASCENT is SFI 38.1 approved. The Ascent Carbon is the newest and best technology in the head and neck restraint market for concussion prevention. The device applies the industry-changing Inertia Dampening System(IDS) to drastically reduce concussion-causing forces without giving up any neck...

The Sparco Frame Lady hoodie is made with a soft Cotton & Synthetic blend material. The hoodie features a front graphic with a woven Sparco tag on the bottom of the hoodie. All hoodies are pre-shrunk. Available in sizes S-L and in Black or...

The Sparco Frame hoodie is made with a soft Cotton & Synthetic blend material. The hoodie features a front graphic with a woven Sparco tag on the bottom of the hoodie. All hoodies are pre-shrunk. Available in sizes S- XXL and in Black, Navy...

The Sparco 1977 hoodie is made with a soft Cotton & Synthetic blend material. The hoodie features a front graphic with a woven Sparco tag on the bottom of the hoodie. All hoodies are pre-shrunk. Available in sizes S- XXL and in Black or...

The Sparco Wool Crew Neck sweater is made with a soft Merino Wool blend. The sweater features a front embriodered Sparco chest patch. Available in sizes S- XXL. Made in Italy

THE SPARCO ORIGINAL LADYHOODIE IS MADE WITH A SOFT COTTON & SYNTHETIC BLEND MATERIAL. THE HOODIE FEATURES A FRONT GRAPHIC WITH A WOVEN SPARCO TAG ON THE BOTTOM OF THE HOODIE. ALL HOODIES ARE PRE-SHRUNK. AVAILABLE IN SIZES S-L. MADE IN ITALY